GoSumsel — Kesenjangan vaksinasi masih menjadi pembahasan di sejumlah negara bahkan hal itu menjadi opik yang disampaikan Presiden Indonesia (RI) Joko Widodo (Jokowi) pada KTT ke-13 ASEM (Asia Europe Meeting) tanggal 25-26 November 2021.
Menteri Luar Negeri (Menlu) Retno Marsudi mengatakan 64,99% populasi negara kaya telah menerima 1 dosis vaksin, sedangkan negara miskin baru 6,48%.
“Dalam keadaan seperti ini diperkirakan hampir 80 negara tidak akan dapat mencapai target vaksinasi 40% populasinya di akhir tahun 2021,” kata Retno
Menlu berujar, Presiden Jokowi menegaskan pentingnya memastikan semua negara dapat mencapai target vaksinasi yang dicanangkan WHO.
Hal ini dapat dilakukan antara lain dengan realisasi komitmen dose[1]sharing segera, peningkatan produksi vaksin global, dan penguatan kapasitas penyerapan negara penerima vaksin.
Untuk jangka panjang, Presiden RI mengajak mitra ASEM untuk memperkuat tata kelola dan arsitektur kesehatan global.
Termasuk melalui traktat pandemi dan mekanisme baru pembiayaan kesehatan bagi negara berkembang.
“Isu penguatan arsitektur kesehatan global ini juga akan jadi agenda utama Presidensi Indonesia di G20 pada 2022,” ujar Menlu Retno.
ASEM merupakan forum “jembatan” yang menghubungkan Asia dan Eropa.
Anggota ASEM mencakup 65% perekonomian dunia dan 55% perdagangan dunia, dimana 11 dari 20 anggota G20 adalah anggota ASEM.
Sementara itu, Direktur Jenderal Organisasi Kesehatan Dunia (WHO) Tedros Adhanom Ghebreyesus mengatakan bahwa “skandal” kesenjangan vaksin Covid-19 di level global harus segera dihentikan. Pernyataan Tedros merupakan respons atas laporan terbaru dari Voice of America (VOA) terkait distribusi vaksin global yang tidak merata.
Jumat lalu, Tedros mengatakan bahwa saat ini ada banyak negara yang memberikan vaksin penguat (booster) atau dosis ketiga. Angka pemberiannya enam kali lebih banyak ketimbang vaksin dosis pertama dan kedua di negara-negara berpenghasilan rendah.
Selain itu, Tedros juga mengatakan bahwa negara-negara dengan cakupan vaksinasi tertinggi “terus menumpuk pasokan vaksin,” sementara “negara-negara miskin hanya bisa menunggu.”
“Ini adalah sebuah skandal yang harus dihentikan sekarang juga,” tutur Tedros.
COVAX, skema berbagi yang diinisiasi WHO, dapat membantu mengatasi kesenjangan vaksin global.
“Namun COVAX membutuhkan setidaknya 550 juta vaksin Covid-19 untuk mencapai target memvaksinasi 40 persen masyarakat dari semua negara di dunia pada akhir 2021,” ungkap Tedros.
Menurut, Ketua DPR, Puan Maharani, mendorong pemerintah mempercepat dan melakukan pemerataan pemberian vaksin Covid-19 pada masyarakat agar tidak terjadi kesenjangan vaksinasi.
“Kita perlu bergotong royong untuk memastikan bahwa jangan sampai ada kesenjangan vaksinasi. Kita tidak bisa sehat sendiri, lingkungan kita juga harus sehat,” kata dia.
Hal itu dikatakan Puan saat mengunjungi Sentra Vaksinasi yang diselenggarakan Himpunan Pengusaha Muda Indonesia (HIPMI) dan Maming Enam Sembilan Group di Pasar Ikan Modern Muara Baru, Jakarta Utara.
Ia mengaku merasakan semangat gotong royong di sentra vaksin yang akan melayani 7.500 peserta vaksinasi selama 3 hari, dengan para peserta antara lain terdiri dari nelayan, anak-anak, tunawisma dan difabel.
Ia juga menekankan pentingnya percepatan vaksinasi anak di atas 12 tahun, terlebih yang sudah mulai uji coba untuk Pembelajaran Tatap Muka.
“Kita ingin memastikan bahwa anak-anak kita bisa bersekolah dengan aman dan sehat. Itu artinya tidak bisa hanya satu atau dua anak saja di satu sekolah yang sudah divaksinasi,” ujarnya.
Ia mengatakan selain vaksinasi, disiplin protokol kesehatan juga perlu digencarkan oleh seluruh lapisan masyarakat. Menurut dia, vaksinasi saja tidak cukup, apalagi dengan kecepatan mutasi Covid-19 dengan berbagai variannya.
Puan juga bicara khusus soal pentingnya percepatan vaksinasi anak di atas 12 tahun, terlebih mereka sudah mulai ujicoba untuk Pembelajaran tatap muka (PTM).
“Kita ingin memastikan bahwa anak-anak kita bisa bersekolah dengan aman dan sehat. Itu artinya tidak bisa hanya satu atau dua anak saja di satu sekolah yang sudah divaksinasi,” kata Puan.
Mantan Menko PMK mengatakan selain vaksinasi, disiplin protokol kesehatan juga perlu digencarkan oleh seluruh lapisan masyarakat. Sebab, vaksinasi saja tidak cukup. Apalagi dengan kecepatan mutasi Virus Corona dengan berbagai variannya.
“Ibarat perlombaan lari kita ini sedang maraton melawan Covid-19 bukan lari sprint 100 meter,” kata Puan.
Soal protokol kesehatan, Puan juga berharap pengusaha-pengusaha muda di HIPMI turut menjadikan hal tersebut sebagai bagian dari company culture atau budaya perusahaan di kantor atau pabrik masing-masing.
Balanset-1A: Innovative Portable Balancer & Vibration Analyzer
Next-generation Dynamic Balancing Solution
Balanset-1A constitutes an revolutionary solution for vibration correction of rotors in their own bearings, manufactured by Estonian company Vibromera OU. The device offers professional equipment balancing at €1,751, which is 3-10 times more affordable than traditional vibration analyzers while maintaining high measurement accuracy. The system enables on-site balancing directly at the equipment’s working position without requiring dismantling, which is critically important for minimizing production downtime.
About the Manufacturer
Vibromera OU is an Estonian company focusing in the design and manufacturing of instruments for technical diagnostics of industrial equipment. The company is registered in Estonia (registration number 14317077) and has offices in Portugal.
Contact Information:
Official website: https://vibromera.eu/shop/2/
Technical Specifications
Measuring Parameters
Balanset-1A provides high-precision measurements using a two-channel vibration analysis system. The device measures RMS vibration velocity in the range of 0-80 mm/s with an accuracy of ±(0.1 + 0.1?Vi) mm/s. The operating frequency range is 5-550 Hz with possible extension to 1000 Hz. The system supports RPM measurement from 250 to 90,000 RPM with phase angle determination accuracy of ±1 degree.
Working Principle
The device employs phase-sensitive vibration measurement technology with MEMS accelerometers ADXL335 and laser tachometry. Two mono-directional accelerometers measure mechanical vibrations proportional to acceleration, while a laser tachometer generates impulse signals for determining rotational speed and phase angle. Digital signal processing includes FFT analysis for frequency analysis and custom algorithms for automatic computation of balancing masses.
Full Kit Package
The standard Balanset-1A delivery includes:
Measurement unit with USB interface – central module with integrated preamplifiers, integrators, and ADC
2 vibration sensors (accelerometers) with 4m cables (optionally 10m)
Optical sensor (laser tachometer) with 50-500mm measuring distance
Magnetic stand for sensor mounting
Electronic scales for precise measurement of corrective masses
Software for Windows 7-11 (32/64-bit)
Plastic transport case
Complete set of cables and documentation
Performance Capabilities
Vibrometer Mode
Balanset-1A works as a comprehensive vibration analyzer with features for measuring overall vibration level, FFT spectrum analysis up to 1000 Hz, determining amplitude and phase of the fundamental frequency (1x), and continuous data recording. The system delivers visualization of time signals and spectral analysis for equipment condition diagnostics.
Balancing Mode
The device supports single-plane (static) and two-plane (dynamic) balancing with automatic calculation of correction masses and their installation angles. The unique influence coefficient saving function enables considerable acceleration of follow-up balancing of identical equipment. A dedicated grinding wheel balancing mode uses the three-correction-weight method.
Software
The intuitive program interface offers step-by-step guidance through the balancing process, making the device usable to personnel without specific training. Key functions include:
Automatic tolerance calculation per ISO 1940
Polar diagrams for imbalance visualization
Result archiving with report generation capability
Metric and imperial system support
Multilingual interface (English, German, French, Polish, Russian)
Usage Domains and Equipment Types
Industrial Equipment
Balanset-1A is successfully applied for balancing fans (centrifugal, axial), pumps (hydraulic, centrifugal), turbines (steam, gas), centrifuges, compressors, and electric motors. In production facilities, the device is used for balancing grinding wheels, machine spindles, and drive shafts.
Agricultural Machinery
The device provides particular value for agriculture, where uninterrupted operation during season is vital. Balanset-1A is employed for balancing combine threshing drums, shredders, mulchers, mowers, and augers. The ability to balance on-site without equipment disassembly permits preventing costly downtime during peak harvest periods.
Specialized Equipment
The device is successfully used for balancing crushers of various types, turbochargers, drone propellers, and other high-speed equipment. The speed frequency range from 250 to 90,000 RPM covers essentially all types of industrial equipment.
Benefits Over Competitors
Economic Value
At a price of €1,751, Balanset-1A delivers the functionality of devices costing €10,000-25,000. The investment pays for itself after preventing just 2-3 bearing failures. Savings on external balancing specialist services amounts to thousands of euros annually.
Ease of Use
Unlike sophisticated vibration analyzers requiring months of training, mastering Balanset-1A takes 3-4 hours. The step-by-step guide in the software allows professional balancing by personnel without specific vibration diagnostics training.
Portability and Independence
The complete kit weighs only 4 kg, with power supplied through the laptop’s USB port. This allows balancing in field conditions, at remote sites, and in hard-to-reach locations without external power supply.
Versatile Application
One device is adequate for balancing the most extensive spectrum of equipment – from small electric motors to large industrial fans and turbines. Support for one and dual-plane balancing covers all standard tasks.
Real Application Results
Drone Propeller Balancing
A user achieved vibration reduction from 0.74 mm/s to 0.014 mm/s – a 50-fold improvement. This demonstrates the exceptional accuracy of the device even on small rotors.
Shopping Center Ventilation Systems
Engineers effectively balanced radial fans, achieving lower energy consumption, abolished excessive noise, and increased equipment lifespan. Energy savings offset the device cost within several months.
Agricultural Equipment
Farmers note that Balanset-1A has become an indispensable tool preventing costly breakdowns during peak season. Reduced vibration of threshing drums led to reduced fuel consumption and bearing wear.
Pricing and Delivery Terms
Current Prices
Complete Balanset-1A Kit: €1,751
OEM Kit (without case, stand, and scales): €1,561
Special Offer: €50 discount for newsletter subscribers
Bulk Discounts: up to 15% for orders of 4+ units
Purchase Options
Official Website: vibromera.eu (recommended)
eBay: trusted sellers with 100% rating
Industrial Distributors: through B2B channels
Payment and Shipping Terms
Payment Methods: PayPal, credit cards, bank transfer
Shipping: 10-20 business days by international mail
Shipping Cost: from $10 (economy) to $95 (express)
Warranty: manufacturer’s warranty
Technical Support: included in price
Summary
Balanset-1A constitutes an ideal solution for organizations aiming to establish an effective equipment balancing system without significant capital expenditure. The device makes accessible access to professional balancing, permitting small businesses and service centers to deliver services at the level of large industrial companies.
The mix of reasonable price, ease of use, and professional capabilities makes Balanset-1A an vital tool for modern technical maintenance. Investment in this device is an investment in equipment reliability, lower operating costs, and enhanced competitiveness of your business.